How to design Serbian Cyrillic PART 2 — True Italics
Igor Petrovic
Posts: 369
I've just published the "Serbian Cyrillic PART 2" article on my blog. The first one was about upright, and this second one is about true italics:
https://nostalgicdolphin.com/blog-post-3/
Italics proved to be harder to describe, taking a month to assemble this instructional study. The thing is that italics are still not strictly established in every aspect, so I had to research historical sources, the official orthography, other Slavic-Cyrillic, modern studies of Serbian handwriting, and personal opinions of type designers and common people.
In addition to being two blog posts, I am also considering putting these two articles into one downloadable PDF which would cost a few bucks. For those who haven't seen the first part, here is the link for it:
https://nostalgicdolphin.com/blog-post-1/
https://nostalgicdolphin.com/blog-post-3/
Italics proved to be harder to describe, taking a month to assemble this instructional study. The thing is that italics are still not strictly established in every aspect, so I had to research historical sources, the official orthography, other Slavic-Cyrillic, modern studies of Serbian handwriting, and personal opinions of type designers and common people.
In addition to being two blog posts, I am also considering putting these two articles into one downloadable PDF which would cost a few bucks. For those who haven't seen the first part, here is the link for it:
https://nostalgicdolphin.com/blog-post-1/
Tagged:
8
Comments
-
Thank you Igor, very good.
1 -
Thanks Andreas, I appreciate it!0
-
Thanks, Igor. It was been a very useful resource. By the way, so to speak, Serbian б is like a Greek delta?0
-
so to speak, Serbian б is like a Greek delta?In writing, the ductus is similar

but in Cyrillic the top is always quite horizontal, while in Greek it may also angle downwards

0 -
It's interesting that some of the Serbian Cyrillic italic forms are used in Russian handwriting, even if not in Russian italics. And, yes, this means that they may be found in the italics of some Russian typefaces too.
0 -
0
-
Thanks Tural, glad to hear that! As per the handwritten Greek delta /δ that John mentions, I don't know what the acceptable area of variance for it is.Tural Alisoy said:Thanks, Igor. It was been a very useful resource. By the way, so to speak, Serbian б is like a Greek delta?
For handwritten /б in Serbian, it can vary a lot. That is natural because it is an outstroke in the free ascender field that breaks connected writing. People tend to be creative at that moment. Here are some possibilities I recalled instantly. All of these are acceptable handwritten forms (субота):
In the article, I mentioned the Greek delta as a nickname for a /б subvariant that tends to deform the /o (base) counter in order to emphasize the handwritten ductus. Opposed to the classic and most common version which keeps the symmetrical counter of the /o base.
Yes, it's interesting what was accepted as a typographic standard in various places that sourced the same handwriting tradition. After "The Great Exoduses of the Serbs", the Serbian intellectual elite and schools ended up in Hungary for about 150 years. They used a lot of Russian books because their printing and cultural development were censored there to a certain point. Even a special language developed "Slavonic-Serbian", which is a heavily Russianized form of the Serbian language. It was deemed snobby compared to the language of the common people that was deemed peasantry. So naturally, the Serbian literates used handwriting very similar to the Russian in that period.It's interesting that some of the Serbian Cyrillic italic forms are used in Russian handwriting, even if not in Russian italics. And, yes, this means that they may be found in the italics of some Russian typefaces too.
The Serbian language reform conducted by Vuk Karadžić rejected "Slavonic-Serbian" and embraced the language of common people as a standard orthography. This was a brave revolutionary move that raised a lot of controversies and implicit persecution of Vuk by the Serbian intellectual and church elite in exile. He was even accused as a "satanist"
Especially for borrowing Latin /j that was not present in any other Cyrillic.
This happened about 100 years after the Petrine reform, so Vuk's alphabet had a century to learn pros and cons. His main goal was the fully phonemic alphabet, by the credo "Write as you speak and read as it is written". So naturally, he needed some new solutions.
But still, the typographic standard had a long way to go, and it is still in development. mainly the italics as a midground between upright and handwriting. "Serbian" /б still hasn't entered the standard fully, but obviously it's an emerging trend in the local type design.
5 -
I am very grateful for this series of articles; I hope the knowledge gained has helped me make my typefaces slightly better suited for Serbian Cyrillic.There is one question that keeps bothering me: are there established approaches to constructing the letter *љ* when the letter *л* has the historical, triangular form derived from the Greek lambda?Let me illustrate with an example: here is the letter from the Lazursky typeface (the Serbian characters were likely added by Vladimir Yefimov):
Here is Yefimov’s Cyrillic version of the Kis typeface:
And finally, here is how I am attempting to design this letter in my current work:
I am not happy with it. While I can manage to balance the letter in isolation, when it appears in the middle of a word during typesetting, it inevitably creates a gaping hole in the upper-right area.Then again, perhaps I’m simply not in the habit of using that kind of ligature at all, and that’s why I stumble at that point.0 -
The capital AE ligature in English achieves compactness by making the right downstroke of the A vertical rather than inclined; clearly, that's an option for a Cyrillic L based on the Greek lambda as well in order to have less of "a gaping hole in the upper-right area".Of course it would be nice to have historical precedent to draw upon, and I hope someone will be able to find some for you.1
-
I think the shape of your л is introducing a number of problems. The triangular part is small and tight, which makes it difficult to balance with the bowl in the Balkan љ. The lambda shape works best as in Lazurksy and in Bulgarian types, with a pointed apex, allowing the triangular form to fill the x-height.It’s difficult to make other suggestions without seeing more of the design.1
Categories
- All Categories
- 47 Introductions
- 4K Typeface Design
- 496 Type Design Critiques
- 589 Type Design Software
- 1.1K Type Design Technique & Theory
- 674 Type Business
- 902 Font Technology
- 29 Punchcutting
- 542 Typography
- 127 Type Education
- 333 Type History
- 82 Type Resources
- 114 Lettering and Calligraphy
- 33 Lettering Critiques
- 81 Lettering Technique & Theory
- 576 Announcements
- 101 Events
- 116 Job Postings
- 174 Type Releases
- 184 Miscellaneous News
- 270 About TypeDrawers
- 54 TypeDrawers Announcements
- 114 Suggestions and Bug Reports



